Desil Power Desil Fuel

With years of experience in mold removal, DesilFuel has created a premium product that makes cleanup quick and easy with great results. DesilFuel can be used in a number of applications.

Why Use DesilFuel?

Attics and Crawls

Attics and crawlspaces can have multiple issues that can cause mold growth. Some of these issues result from building debris being wet, ventilation being vented into areas where it shouldn’t be, floods and leaks

Fences

Picket and vinyl fencing can grow mold by getting wet. DesilFuel can clean both these surfaces quickly and easily.

Home Use

For the average homeowner, there isn’t an easy solution to clean up mold around the house. DesilFuel aims to make home cleanup easy.

+1 (208) 495-5959

What Exactly is Mold?

Mold is a general term for thousands of types of fungus that can easily grow on almost any surface in a structure. All that needs to happen is for the temperature, moisture and light conditions to be just right and before you know it, you can be dealing with a mold infestation. Not every kind of mold is toxic to humans, but you should still be wary of its presence in your home because it can eat away at surfaces like wood and drywall. Over time it can affect the integrity of your structure even if it’s not a harmful strain in terms of respiratory effects.

As certified professionals, DesilFuel can help with mold removal and remediation.

How to use our product

Using a commercial mold remover is often the simplest option, as these sprays require no prior preparation and generally contain bleach as an active ingredient, effectively fighting and eliminating the spores that cause mould.

Always follow the instructions on the label, and use the product as directed.
Wear rubber gloves and old clothes when using a bleach product, as it may stain your clothes or irritate your skin.
If you do get any spray on your skin, then immediately rinse with water and seek medical advice if necessary.
Keep children out of the affected room until the cleaning job is done.
Make sure the area that you are cleaning is well ventilated.
Test all products on a small inconspicuous area first to ensure there will be no staining or other adverse effects.

Now that you’re safely protected, you should follow these easy steps to remove mildew and mold

Place a cloth or towel on the floor below the area that you plan to clean to ensure that the spray doesn’t run down onto your floor.
Spray the areas where mould and mildew are present and wait a couple of minutes for the product to take effect.
Once you see the product starting to disappear, take a cloth, soak it in a bowl of hot water, wring it out and then wipe away the spray. Making sure you don’t have too much water on the cloth, as this can make the paint or wallpaper on your walls bubble.
Alternatively, you might like to use a damp paper towel to wipe away the spray. This is a practical solution as the paper towel can then be thrown away, rather than needing to be rinsed like a cloth.

Call or Email Us Today For Contractor Bulk Pricing

Call us at +1 (208) 495-5959 or email us at desilpowerproducts@gmail.com or send us a message on contact page

Who We Serve

Home Owners

Restoration Companies

Contractors

Property Managers

Retail

Other

What Is A Blower Door Test?

A blower door test is used to measure air changes per hour in a home or building. Air changes in a home are normal and beneficial as old air is replaced with new fresh air. Too many air changes however, can be detrimental as each time the air changes over it needs to be reheated or recooled resulting in increased energy consumption issues. Excessive air changes can cause drafts and uncomfort resulting from air leaks and even mold, moisture and condensations issues in a home.

To prepare for the blower door test we begin by turning off the heating and air conditioning system, bathroom fans and kitchen exhaust fans. Next we walk around making sure all exterior doors and windows are shut tight including ones to an unfinished basement or garage, any place outside the buildings’ thermal envelope. Once the house is ready we choose one centrally located exterior door and install the blower door frame and fan. We use the blower door fan to depressurize the house to a Pascals of 50.

Once the house is depressurized outside air will begin to infiltrate the home more aggressively making leaks easier to identify. We can use a thermal imager to easily identify problem areas by measuring temperature differences in any wall or ceiling which leads to unconditioned spaces.

We carry chalk, spray foam and weatherstriping and can work with the homeowner or contractor to correct obvious air leakage issues right there on site and retest to see if a desired score can be achieved.